I'm curious about what you had in mind that you couldn't say it in the video because it could be unsafe. You said you could send a private message for those who are curious.
Key comment:
It absolutely has to do with cold electricity (Tibor's version). All the transformers are reversed, meaning
the primary is the HV winding and the output is the line voltage winding. There is nothing in the blue
box, except for the HV/HF driver to a FWB and to the two capacitors and the spark gap. It is like
Zilana's final disclosure with two small caps one in parallel, one in series with the spark gap. You can
have as many MOTs as you want, as long as they have similar input impedances. I am running all
those lights with (2 ) 1uF capacitors. It absolutely shouldn't work, but it does. Years ago, I exchanged
some comments with Kurt on his experiments, and I hope he has seen this video. I probably started
building Tesla coils 5 years ago, but the resonance concept, I found hard to build and tune, so I just
built PNP slayer circuits, which brought me here. What I have experienced, is that many people took
Don Smith comments and placed them in unreal constructs. The two worse misplaced topics are 1.
Earth Grounding, 2. Resonance. They are important maybe to some, but not to me. They make
transmission possible, but I don't need to use it in the device in the video. Not saying that the device
doesn't achieve resonance on its own. If you have a coil, capacitors and a spark gap fed by DC, you will
produce a tank circuit. However, my secondary goes to a FWBR so I can fill a large cap, and drives DC
LED bulbs. Don Smith said his DSE didn't require tuning, and moron level comprehension. So I chose
that device. I have disclosed everything to you how to build this circuit. The thing is, until the light bulb
goes off in your head, you wont know how to build these things. For me it turned on after reading Tibor
Kemeny's patent and asked how can he possibly get power from that? Then I saw what Tibor meant,
and how to leverage it. Then, what Don said about chasing the wrong rabbit was 20/20. Don's
statements about violating Ohm's Law, and room temperature superconductivity, and as many copies
as you want.... all where understood.
@XR_IX
The special transformer is k101, a high frequency amorphous metal transformer core
I'm wondering if Joel or anyone else is aware of this channel and the work this guy is doing.
I have been following him for a short time and never really put 2 and 2 together until now.
Definitely worth at least taking a look at. I'd love to hear your thoughts because this looks promising even if it is not a solid state solution like we all so desire. Link Below.
Good day folks here is the circuit diagram of the reactive solid state "Moray" generator!
A memo on fine tuning:
Given that both the inductance and capacitance are 70.48 µH and 70.48 µF respectively, the LC circuit is indeed resonant at 60 Hz. To fine-tune this circuit, You can optionally incorporate a parallel vacuum capacitor for small adjustments and a series capacitor for potential impedance matching.
### Verify Resonance Frequency
- **Inductance**: (L = 70.48
- **Capacitance**: (C = 70.48
- **Resonance Frequency**: (60
- **Parallel Vacuum Capacitor**: (C should range from 0 to 3.524 µF for fine-tuning.
- **Series Capacitor for Impedance Matching**: approx 53.05 uF
*This configuration allows for fine-tuning of the LC circuit to maintain resonance at 60 Hz and achieve impedance matching if needed.
Concept
LC Resonant Circuit: Utilize the high circulating reactive power at resonance.
Direct Battery Integration: Connect batteries in a manner that allows them to charge without disrupting the reactive power oscillations significantly.
Resistive and Inductive Loads: Use light bulbs and other inductive components to balance the load and manage current flow during different parts of the AC cycle.
Method:
Series LC Circuit with Batteries and Light Bulbs
Resonant LC Circuit:
L: Inductor
C: Capacitor
Direct Battery Charging:
Connect batteries directly into the LC circuit at points where they can charge during the positive half of the AC cycle and be protected from reverse current during the negative half.
Light Bulbs as Loads:
Use light bulbs as resistive/inductive loads to absorb power during the negative half of the cycle, thus protecting the batteries.
Practical Considerations
Voltage Levels:
Ensure the voltage levels in the LC circuit match the charging requirements of the batteries.
Current Flow Management:
The light bulbs will naturally limit the current during the negative half-cycle, preventing reverse currents from damaging the batteries.
Tuning:
Fine-tune the circuit to ensure that the LC circuit remains in resonance while effectively charging the batteries.
Testing and Safety:
Start with lower power levels to test the setup.
Monitor the temperature and performance of the batteries and light bulbs to ensure they are operating within safe limits.
Challenges and Adjustments
Balance: Achieving the right balance between the reactive power accumulation and the load distribution is crucial.
Fine-Tuning: You may need to experiment with different configurations and component values to achieve optimal performance.
Monitoring: Continuously monitor the circuit's behavior to avoid overcharging or damaging the batteries.
By using this approach, you can tap into the reactive power of the LC circuit to charge batteries directly while using light bulbs to manage the current flow during the negative half-cycle. This should allow you to maintain the resonant condition and recover reactive power without the use of rectifiers.
Just saw this information on Nonlinear Resonance Circuit For Wireless Power Transmission And Wireless Power Harvesting, if one could make a Tesla coil using this method, it'll probably be the cheapest yet most powerful over unity system
The only special component the circuit needs seems to be just a ferroelectric capacitor, in the video, the person seems to be using a variable capacitor and something else that couldn't make out
