07-10-2024, 08:32 PM
(07-10-2024, 10:06 AM)rajendra1904 Wrote: I have tried keeping the dipole open using the peg cell which gave me 0.6 volts without conditioning them and i connected the peg cell with a 3.7v cell 2400 mah battery but it couldnt light up the LED i dont know what went wrong i measured the voltage after the led was connected it dropped so low. how can i increase the current and also keep the potential at 3.7v + 0.6v = 4.3 volts atleast. please help me out guys.
You need about 100v so that at low current the PEG cell provides in series it enough to drive the LED or charge a cap dump etc...