11-22-2023, 06:36 PM
(11-21-2023, 11:08 PM)halvardu Wrote: Hi .
I have now received all the parts for this project, but as a beginner there is something about this drawing that I do not understand.
To me it looks like there is positiv charge at each end of the coil and also to the negative side of the capasitor, is this correct? or am I the one who misunderstood??
If someone would be so kind as to explain this to me? I would be very grateful
Best regards,
Halvard
(11-22-2023, 02:52 PM)admin Wrote:(11-22-2023, 12:51 PM)halvardu Wrote: Is it not anyone willing to help a newbie?
Not sure about this circuit. I didn't make it. The original got posted on overunity.com forums.
I have a video SCR cap dump, and its the same control circuit that triggers the SCR from a charging caps, In the example I used the mains on rectifier. But that can be the back emf side of a generator or any other method you want to charge your caps.
The cap should charge via backemf diode against the negative switching side of the coil. and cap minus connects to circuit plus. Because it gets the reverse kickback. SCR should trigger the negative flow from the capacitor negative back into your charging battery, capacitor plus connected direct to your battery.
And just a side note, This is not really newbie stuff. It took me weeks to get everything right. If you got the time to tune everything and find the best values for your setup. Also different batteries work differently as some have stated, Some can get conditioned while others will reject the process all together, I myself stepped away from these methods as nice as they are when it works, It's so picky to step up and maintain.
Good little hobby if you want to mess and learn about it, But far from a mainstream solution. If you read some of the youtube comments some praise me for having replicated and works while others send me to hell because it didn't work....
----------------------------------------------------------------------------------------------------------------
Thank you so much for the reply .
I thought this was the schematic for your "100 watts of free energy" project? But it's okay anyway, I think this is exciting, so I'll keep trying and learning.
I have successfully made some different version of the cap dump, and they are working great, so i am on the right track .
Thanks for all the great youtube videos and information you are sharing!
Best regards
Halvard