I am having some irregularities with the device, As many in the field have had... This thing so far gives me a whole different reading depending on what time of the day. it feels random but we all know it can't be "random" I ruled out direct coupling to "AC" How ever I can't guarantee that some AC scalar potentials from around the "World" driving this at random.
So far It has always given me some kind of voltage around 20 V min and over 2KV max. Most of the time when it gets sluggish I can "trigger" it. But not always.....
I don't live anywhere near a big RF source, I even made sure and logged into the Canada Spectrum Direct and did a search in my area. I think the Police service has the most power on VHF at around 100 watts, FM radio around here is all under 50 watts. No big boys no AM.
But I do live next door so to speak from an Active Super Darn Radar IN the HF ranges(Kapuskasing Ontario) And in between a 49 mhz Wind Profiler Radar. (Abitibi Canyon, Ontario.)
These devices create lots of "Scalar" potentials. And perhaps it is in part what is exciting this coil. Perhaps it needs a low HF RF trigger to work those differences within the transducer.
I'm still playing with this and put a hold on more videos for now until I can figure out what really is going on, Take it to the beach as some suggested.
And of course it may be nothing of that and just likes to work "random" Either way, I'm bound to find out what is going on so I can replicate and know what I'm talking about...
So perhaps you all will want to put a hold on this for a while as at this point I have no answers and I don't feel good about myself when I can't explain with confidence what is going on,
And when it does ramp up into the KV range, I'm blowing up all my reactive coupling stages, The coil part runs cold all the time, It's turning into a real pain, Side note got a bedini motor running from that output whatever that means at this point.... But the reactive stage gets red hot. I guess good if I wanted to build a heater
I guess Chat GPT was not far off with the 500 watts calculation on the output, It keeps eating and eating my my reactive stage, the whole thing, the capacitor the diodes it all breaks down after a few moments of those KV peaks.
Right now the device is in a complete non working state, Well it works like a traditionally Bedini coil that you can pulse, Just nothing special comes from it unless I marry it with reactive coupling, then it builds up those peaks and keeps going for hours, I got shocked from it yesterday and my hand still hurts today. And it was a strange shock, As soon as it made contact, As soon as I put my hand away it took some inches to get away to break the shock, It just kept giving it to me even from a distance as I pulled away, almost like this would of been 100kv or something.
I know your all excited, but the results so far are far from any "Scientific" credibility. Unless I can control and replicate..... But hang tight everyone. I'm making progress everyday.
So far It has always given me some kind of voltage around 20 V min and over 2KV max. Most of the time when it gets sluggish I can "trigger" it. But not always.....
I don't live anywhere near a big RF source, I even made sure and logged into the Canada Spectrum Direct and did a search in my area. I think the Police service has the most power on VHF at around 100 watts, FM radio around here is all under 50 watts. No big boys no AM.
But I do live next door so to speak from an Active Super Darn Radar IN the HF ranges(Kapuskasing Ontario) And in between a 49 mhz Wind Profiler Radar. (Abitibi Canyon, Ontario.)
These devices create lots of "Scalar" potentials. And perhaps it is in part what is exciting this coil. Perhaps it needs a low HF RF trigger to work those differences within the transducer.
I'm still playing with this and put a hold on more videos for now until I can figure out what really is going on, Take it to the beach as some suggested.
And of course it may be nothing of that and just likes to work "random" Either way, I'm bound to find out what is going on so I can replicate and know what I'm talking about...
So perhaps you all will want to put a hold on this for a while as at this point I have no answers and I don't feel good about myself when I can't explain with confidence what is going on,
And when it does ramp up into the KV range, I'm blowing up all my reactive coupling stages, The coil part runs cold all the time, It's turning into a real pain, Side note got a bedini motor running from that output whatever that means at this point.... But the reactive stage gets red hot. I guess good if I wanted to build a heater
I guess Chat GPT was not far off with the 500 watts calculation on the output, It keeps eating and eating my my reactive stage, the whole thing, the capacitor the diodes it all breaks down after a few moments of those KV peaks. Right now the device is in a complete non working state, Well it works like a traditionally Bedini coil that you can pulse, Just nothing special comes from it unless I marry it with reactive coupling, then it builds up those peaks and keeps going for hours, I got shocked from it yesterday and my hand still hurts today. And it was a strange shock, As soon as it made contact, As soon as I put my hand away it took some inches to get away to break the shock, It just kept giving it to me even from a distance as I pulled away, almost like this would of been 100kv or something.
I know your all excited, but the results so far are far from any "Scientific" credibility. Unless I can control and replicate..... But hang tight everyone. I'm making progress everyday.