09-28-2023, 07:23 PM
Sorry all for the delayed reply, Yes the core is just regular multi copper wire, With the insulator still on, all twisted like a chain together, each end exposed just enough to close the loop at one point and make a solid ground tap with a thick cable tap to core for ground and emf diode. Electrical tape layer around the core and wrapped with thousands of turns of magnetic wire all around.
From my experiments it may work well or better with other kinds of core material, With limited experience with actual ferrite core, nIf you can loop the ferrite rings around a ferrite rod, It's hard to explain and I don't want to go into details on youtube but just like Bedini's Cejka friend, Like the gold "electromagnet" this thing acts like an electro-electret. So by varying and breaking up the core stuff and having this "vinyl" in between down to the core material well determine right down to even frequency what electret this will "Attract" even those that are not even magnetic.
Lots more experimentation with these broken up core devices needed to better understand the full scope and how it can be made applicable for greater output.
From my experiments it may work well or better with other kinds of core material, With limited experience with actual ferrite core, nIf you can loop the ferrite rings around a ferrite rod, It's hard to explain and I don't want to go into details on youtube but just like Bedini's Cejka friend, Like the gold "electromagnet" this thing acts like an electro-electret. So by varying and breaking up the core stuff and having this "vinyl" in between down to the core material well determine right down to even frequency what electret this will "Attract" even those that are not even magnetic.
Lots more experimentation with these broken up core devices needed to better understand the full scope and how it can be made applicable for greater output.