Not a member yet? Why not Sign up today
Create an account  

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Self Sustaining Acousto Electric Generator

#1
Video 
Here is the method in details:

https://youtu.be/uxGdLtpGmSY

Here's an overview of how such a system could work:

A piezoelectric material is placed inside an audio chamber or resonator, which is designed to amplify and sustain a specific frequency of sound wave. The size and shape of the chamber, as well as the material properties of the piezoelectric material, would be carefully chosen to maximize the acoustoelectric effect.

The electrical signal generated by the piezoelectric material is then used to trigger a back EMF coil loop,The feedback loop created by the back EMF coil loop will help sustain the sound wave within the chamber, and thus the acoustoelectric effect.

the system is first triggered by an external force, like a tap on the audio chamber or a burst of sound. This causes the audio chamber to resonate and the piezoelectric material to vibrate, generating a voltage spike that is fed into one of the coils (let's call it the "trigger coil") of the back EMF loop. The back EMF loop consists of two speaker coils, which are also used as part of the audio feedback loop. As the back EMF loop generates a voltage spike, it causes the speaker coils to vibrate, which in turn keeps the audio feedback amplitude strong in the audio chamber, sustaining the vibrations of the piezoelectric material.

The audio tone generated by the speaker is then fed back into the audio chamber, where it reinforces the original trigger, causing the speaker to continue vibrating and generating a sustained feedback loop. This sustained feedback loop keeps the back EMF and audio tone going, allowing the system to continue generating electricity.

So in summary, the speaker has two jobs in this system: (1) to generate the initial voltage spike and (2) to vibrate and generate an audio tone that sustains the feedback loop. By using the speaker in this way, we can create a self-sustaining system that generates electricity without the need for an external power source.

The sustained sound wave within the chamber will continue to cause the piezoelectric material to vibrate and generate electrical signals, which can be used as triggers for the back EMF coil loop. As long as the feedback loop is maintained, the system should be able to sustain itself without any external power input.

The output of the back EMF coil loop could be used to power a load, such as a battery or electronic device.

Overall, the key to making this system work would be careful design and optimization of the audio chamber, the piezoelectric material, and the back EMF coil loop. The system would also need to be carefully tuned to the resonant frequency of the audio chamber to maximize the acoustoelectric effect. The audio chamber needs to be designed to resonate at the same frequency as the speaker coils' optimal frequency, which is also the frequency of the audio tone that triggers the back EMF loop. This resonance will amplify the audio tone and maintain the feedback loop, which allows for the back EMF to bounce back and forth between the coils and generate power that can be tapped into. The resonance can be controlled and maintained by adjusting the size and shape of the audio chamber and the frequency of the audio tone.

One advantage of this approach is that it doesn't require any external power source or battery, making it self-sustaining. Another advantage is that it could potentially be made from low-cost materials, such as piezoelectric ceramics and simple audio speakers.

it's true that traditional loudspeakers can suffer from significant energy losses, and piezoelectric transducers can have relatively low efficiencies, the proposed system is not based solely on either of these components. Instead, it combines the unique properties of piezoelectric materials and audio chambers to create a system that is designed to maximize the acoustoelectric effect and minimize losses.  In addition, the system utilizes a back EMF feedback loop to sustain the sound wave within the audio chamber, which further increases efficiency. While it's true that no system can be 100% efficient, this approach has the potential to generate usable amounts of electricity without an external power source.
Reply

#2
The example was one of the first cases when I realized you can feed an impulse back and if not careful, you can damage the amplifier, because CURRENT increases each time the feedback loops through the coils of the system. Guitarists frequently use this effect to create a sustaining sound using the feedback phenomena. Yes, there is an external source of power for the amplifier, but if someone cares to measure the input and output currents they will find that it increases each time if the guitar is close enough to the speaker, thus increasing the amplitude of the signal.

The example above is a great way to show that with relatively simple means.
Reply



Forum Jump:


Users browsing this thread:
1 Guest(s)