Yesterday, 08:56 PM
How do we do it?
-You get a good deep ground (use a coax cable and copper plates).
-Then you need capacitors (lots of copper plates + thin myca or gypsum layers, stacked an well insulated) (optional)
- You need to step up the current in a way enough to produce a spark, what we do is basically use a tesla coil setting (can experiment to add a step up transformer from Ground wire too)
- You need a mechanical oscillator, depends on the atmospheric conditions need to be able to modulate the frequency of connecting and disconnecting the Earth.
- On the top side of our capacitor (which is charged by our secondary coil) we add an antenna.
What they did improperly with the athmosphere energy harvesters is that the antenna didn't had enough capacitance with low impedance, and that the potentials cancel out. What you need to do is charge up the antenna with the very ground (we get a large postive potential), then you disconnect the ground, and then resonate the antenna (can use a subwoover to make it vibrate), the potential quickly changes from positive to negative. Basically we create an active energy funnel. We can get enormous amounts of energy during lighting storms (be careful to put some good fuses so you don't get your system melted if a lightning hits it), even if the storms are far away, the earth begins ringing for a long time so you can get even better results.
The more potential you can excite your system with, and then release it as quickly as possible using the subwoover for mechanical vibration, the better, als of course a taller and larger antenna is also a help, be sure you insulate all exposed parts except the antenna head and the ground plates.
Another way to do it is to simply get the ground wire, make a good thick wired coil, and then put into an iron rod and vibrate it mechanically across the coil (subwoover) to pickup the current, at the other side pass it through an alternator, now your ground wire is the phase and the 0 is the antenna.
I have also a small theory which involves UV laser pointed upwards which creates an ionised plasma connection with the upper ionosphere (or at least the clouds) then use this as your antenna for dissipating your ground current. (experimental idea not sure if this last thing will work as expected.
-You get a good deep ground (use a coax cable and copper plates).
-Then you need capacitors (lots of copper plates + thin myca or gypsum layers, stacked an well insulated) (optional)
- You need to step up the current in a way enough to produce a spark, what we do is basically use a tesla coil setting (can experiment to add a step up transformer from Ground wire too)
- You need a mechanical oscillator, depends on the atmospheric conditions need to be able to modulate the frequency of connecting and disconnecting the Earth.
- On the top side of our capacitor (which is charged by our secondary coil) we add an antenna.
What they did improperly with the athmosphere energy harvesters is that the antenna didn't had enough capacitance with low impedance, and that the potentials cancel out. What you need to do is charge up the antenna with the very ground (we get a large postive potential), then you disconnect the ground, and then resonate the antenna (can use a subwoover to make it vibrate), the potential quickly changes from positive to negative. Basically we create an active energy funnel. We can get enormous amounts of energy during lighting storms (be careful to put some good fuses so you don't get your system melted if a lightning hits it), even if the storms are far away, the earth begins ringing for a long time so you can get even better results.
The more potential you can excite your system with, and then release it as quickly as possible using the subwoover for mechanical vibration, the better, als of course a taller and larger antenna is also a help, be sure you insulate all exposed parts except the antenna head and the ground plates.
Another way to do it is to simply get the ground wire, make a good thick wired coil, and then put into an iron rod and vibrate it mechanically across the coil (subwoover) to pickup the current, at the other side pass it through an alternator, now your ground wire is the phase and the 0 is the antenna.
I have also a small theory which involves UV laser pointed upwards which creates an ionised plasma connection with the upper ionosphere (or at least the clouds) then use this as your antenna for dissipating your ground current. (experimental idea not sure if this last thing will work as expected.