Water Powered Self charging Oscillator

[JoeLag]

Here I show the concept:

https://youtu.be/4ubmNVDp-oU


This project involves the use of a copper oxide layer and water to create a functional water "battery" that can power an AM broadcast transmitter. Taking the project one step further, the batteries were separated into two packs, with the primary water battery running a simple flyback type NPN based oscillator.

To enhance the performance of the circuit, DC pulses are filtered with one of the electronic lab's on-board diodes before being fed into the base of a PNP transistor, which controls the switching of the isolated water battery 2. The pulses generated by PNP Q2 connected to water battery 2 are rectified back to DC and sent back into the primary oscillator circuits, resulting in a kind of feedback that balances the power supply of the other circuit and keeps the device running for an extended period.

This type of "battery" seems to be able to maintain a charge indefinitely as long as it is pulsed with a short break in between to allow for the chemical reaction to occur. With a week-long runtime, the only maintenance required is the periodic changing of water due to corrosion buildup. Additionally, the device can also charge a single regular rechargeable AA 1.5-volt battery in about a day. This innovative concept has significant potential for various applications in the future.

[Mozart]

Actually, you don’t need copper oxide, just a a short wire 2-3 mm thick bare copper wire coiled in a plastic tube 20 mm diameter by 100 mm tall and another coil of bare aluminium wire or iron wire inside the copper coil with simply drinkable water will give you 0.3 - 0.5 V per tube.  Make 48 of them connect them in series parallel and you got a decent power source where water needs to be replenished from time to time.

And indeed, the output must be pulsed in order not to deplete the battery. A capacitor of 100uF across of battery output just before pulse generator will also improve the performance … additional a voltage doubler or any other mean to raise the power would make really useful for many other applications.