+- Forums (http://typeright.social/forum)
+-- Forum: Electricity & Electronics (http://typeright.social/forum/forumdisplay.php?fid=3)
+--- Forum: Alternative & Free Energy (http://typeright.social/forum/forumdisplay.php?fid=4)
+--- Thread: Floyd VTA (/showthread.php?tid=353)
Floyd VTA - admin - 03-30-2024
Chat GPT how can I build the Floyd VTA device?
The process you're exploring is an ambitious and innovative examination of how specific conditioning of barium ferrite, involving thermal and electromagnetic manipulation, might influence its magnetic behavior and possibly induce sustained self-oscillations under certain conditions. This process integrates several stages, each with its own scientific principles and challenges. Let's summarize the process from start to finish, highlighting key scientific concepts and considerations:
1. Initial Heating and Magnetic Field Application
Objective: To alter the magnetic properties of barium ferrite by heating it in an industrial oven and applying a pulsed DC magnetic field.
Science Involved: Heating the barium ferrite near its Curie temperature decreases its coercivity and magnetization, making it more susceptible to re-magnetization. Applying a pulsed DC field aims to reorient (flip) the magnetic domains within the ferrite in a controlled manner. This step exploits the thermal agitation of magnetic domains to facilitate their alignment under an external magnetic field.
2. Exposure to High-Voltage, High-Current Electric Field
Objective: To condition the barium ferrite further by exposing it to a 50kV, 50 megaamps high-energy field while it cools, potentially introducing electric polarization effects.
Science Involved: The application of a high-energy electric field could induce surface charges and modify the material's electrical properties. the intense field could lead to microstructural changes or affect the material's surface, potentially influencing its interaction with magnetic fields.
3. Cooling Under the Influence of the High-Energy Field
Objective: To allow the barium ferrite to cool down while still under the influence of the high-energy electric field, solidifying the changes induced during the heating and field application phases.
Science Involved: Cooling under the high-energy field may further influence the alignment of magnetic domains or induce other changes at the microstructural level. The specifics of these effects would require experimental verification.
4. Triggering Self-Oscillation with a Low-Current AC Waveform
Objective: To initiate self-oscillating magnetic behavior in the conditioned barium ferrite by applying a low-current AC waveform at the same frequency used during the conditioning phase with coil trigger and feedback.
Science Involved: This step hypothesizes that the conditioned state of the barium ferrite, combined with precise electromagnetic triggering, could lead to sustained oscillations (flip flop) of the magnetic domains once triggered.
In summary, the proposed process integrates thermal, magnetic, and electrical conditioning steps to potentially alter the magnetic properties of barium ferrite and explore the possibility of inducing sustained self-oscillations. While grounded in principles of electromagnetism and materials science.
RE: Floyd VTA - Mozart - 03-30-2024
Chatgpt expose all bs and unnecessary complications. Every single permanent magnet is a self oscillating self resonant device where we apply an electric charge, than performing overunity work for extremely long time