I am giving you the draft, feel free to research it.
All about the Unified theory you can find in the PDFs attached.
About the magnet flux modulator(transistor), it works better than shielding
For example we take a good big horseshoe (steel one) and we attach paralel to it some powerful neodymium stick. Then just after it we bring in a small winding. A tiny bit of voltage is needed to simply modulate the magnetic flux within the ferromagnet, it shifts the gradient so the center of the flux shifts, when this shifts then the attraction power of one pole becomes spread out on the longer part of the ferrite, the smaller part (after the coil) gets super concentrated flux gradient and attracts stronger at the tip. So basically we oscillate our time polarized flux (magnets i call time batteries) with a tiny resonant switch. Then the rest is easy, a V gate, flywheel, generator, detector, transistor, batteries, switch.
I also attached a rough sketch image of the gauss flux transistor
Hello @vnachow
Thanks for the post.
I am thinking about your "magnet flux modulator". It sounds me similar to the Bearden's MEG.
Is it the same in principle?
And another question - did you get some "interesting" results from it?
Andy
(10-24-2025, 06:48 PM)Andy Wrote: [ -> ]Hello @vnachow
Thanks for the post.
I am thinking about your "magnet flux modulator". It sounds me similar to the Bearden's MEG.
Is it the same in principle?
And another question - did you get some "interesting" results from it?
Andy
Hey Andy, I don't know how this MEG operates I was thinking it out myself, I currently cannot experiment as I went to the big city to make some money, next year when I get back to my house I'll experiment with this and also my time machine hopefully. First I'll need the energy then I'll try to work out the rest of my ideas. I am also thinking about a freeze ray but I can't get any better ideas than the one with the destructive interference layed out by Tom B.
Okay I have checked the MEG however I do not see any permanent magnets attached, and mine is actually a motor so it has moving parts. I thought of simply making it with a pickup coil however I have the bad intuition it wont work with one as I actually need a magnetic resonant accelerator rotor, similar to a V-gate however the entire idea is that we reset the flux cycle with an insignificant input. What makes the energy as Ive already explained in my unified field theory is that time itself is a huge source of energy and we "charge" our time battery (magnet) by simple displacement. The catch is that the materials needed to produce a magnet cannot be created easily, we have an overabundance of iron metal on Earth, this iron in my eyes is more valuable than gold because it can trap local time just as a battery. Therefore I compared the magnetizing process as a wildfire all you need is a match (the high ampere charge) then it stores time potential for a long time. I haven't seen any research if constant magnetisation and demagnetisation shorten isotope half-life. Some will say "magnets are just springs" not really, consider the energy input in a paramagnetic coil needed to replicate the flux of a permanent magnet for just one hour!!! All we need is to jiggle the flux of the permanent magnet, therefore we use a ferrite horseshoe block so we can modulate this flux otherwise we cannot easily do it locally at the very magnet's body.
It may help if you analyse flux modulation as seen in pictures attached … Don Smith version.
Any ferromagnetic material placed between 2 magnets in repulsion at equal distance can slide between magnets with almost no resistance.
If we place coils on each magnet electric power is generated each time the iron pas between magnets.
Magnets behaviour in this setup: will have a compression at the pole facing each other, when iron is interposed magnets expand their field as both of them go in attraction to the iron.
Note: we don’t spend any energy to create magnetic field, magnetic field is not changing direction, modulation takes place at a single pole. Eddy currents will circulate in the coils all time, Lenz law will be present and having only beneficial effect as there is no opposite magnetic field to oppose.
If an iron disc with holes is used for this modulation required torque will be minimal, and will be constant independent of rpm of the disc. Torque required to spin the disc can be matched by any small dc motor (from toys or small cnc machines). Under load there is no variation of torque required as electric power do not create a reversal of magnetic polarity, and if even it would be, has no influence as coils are wounded on the magnets and not on the rotor (iron disc). A pwm driver (speed controller) is recommended for dc motor to find out maximum output for coils used.
Coils can be wired in series each pair and parallel each pair. Construction must be sturdy and precise, distance between magnets in opposition must be adjusted (easy to do using a magnetic film viewer) and thickness of iron disc must be sufficient to cancel opposition between magnets when interposed. If iron disc is used there would be an advantage as it can act as a flywheel reducing further energy consumption for dc motor, but an plexiglass disc can be used with iron inserts instead of holes in the iron disc.
Number of coils and diameter of the disc depends on specifications of the dc motor. This dc motor must see very little load above idle spinning.
Also, if permanent magnets are placed at distance from generating coils on the iron disc it can be the rotor of the electric motor making one single motor generator on a single shaft. Can be multiplied number of discs or increase diameter of the disc for large power generation, or both.
3-5 kwh setup can be done artisanal diy manner at home with off the shelf components and some labour+tools.
If anyone understands how this generator work, can figure out how to make it solid state if has ability and capability to build.
It would be no different from a water dropper (Lord Kelvin) or Daniel Mcfarland Cook coils if one is smart to compare diagrams of magnetic/electric flow.
It seems the files are too large to be attached, if anyone needs them I will try something to share.
After preliminary tests it seems that both dc and ac are generated by this version in the same time.